net-misc/asterisk-base: new package, add 1

Closes: https://bugs.gentoo.org/907060

Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Signed-off-by: Joonas Niilola <juippis@gentoo.org>

9 files changed, 823 insertions, 0 deletions

diff --git a/net-misc/asterisk-base/asterisk-base-1.ebuild b/net-misc/asterisk-base/asterisk-base-1.ebuild
new file mode 100644
index 000000000000..83c1cd3dee45
--- /dev/null
+++ b/net-misc/asterisk-base/asterisk-base-1.ebuild
@@ -0,0 +1,42 @@
+# Copyright 2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit systemd tmpfiles
+
+DESCRIPTION="Gentoo Asterisk init scripts"
+HOMEPAGE="https://www.gentoo.org/wiki/No_homepage"
+# Need to set S due to PMS saying we need it existing, but no SRC_URI
+S="${WORKDIR}"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86"
+
+RDEPEND="
+	net-misc/asterisk
+	!<=net-misc/asterisk-16.30.0:0/16
+	!<=net-misc/asterisk-18.18.0:0/18
+	!<=net-misc/asterisk-20.3.0:0/20
+"
+
+src_install()
+{
+	newinitd "${FILESDIR}/initd-1" asterisk
+	newconfd "${FILESDIR}/confd-1" asterisk
+	newsbin "${FILESDIR}/asterisk_wrapper-1" asterisk_wrapper
+
+	systemd_newunit "${FILESDIR}/asterisk.service-1" asterisk.service
+	systemd_install_serviced "${FILESDIR}/asterisk.service-1.conf" asterisk.service
+
+	newtmpfiles "${FILESDIR}/tmpfiles-1.conf" asterisk.conf
+
+	insinto /etc/logrotate.d
+	newins "${FILESDIR}/logrotate-1" asterisk
+}
+
+pkg_postinst()
+{
+	tmpfiles_process asterisk.conf
+}
diff --git a/net-misc/asterisk-base/files/asterisk.service-1 b/net-misc/asterisk-base/files/asterisk.service-1
new file mode 100644
index 000000000000..08245d9fe87f
--- /dev/null
+++ b/net-misc/asterisk-base/files/asterisk.service-1
@@ -0,0 +1,23 @@
+[Unit]
+Description=Asterisk PBX and telephony daemon.
+After=network.target
+
+[Service]
+Type=simple
+WorkingDirectory=/var/lib/asterisk
+User=asterisk
+Group=asterisk
+ExecStart=/usr/sbin/asterisk -f -C /etc/asterisk/asterisk.conf
+ExecStop=/usr/sbin/asterisk -rx 'core stop now'
+ExecReload=/usr/sbin/asterisk -rx 'core reload'
+
+LimitNOFILE=4096
+ProtectSystem=full
+ProtectHome=yes
+PrivateTmp=yes
+
+Restart=always
+RestartSec=5
+
+[Install]
+WantedBy=multi-user.target
diff --git a/net-misc/asterisk-base/files/asterisk.service-1.conf b/net-misc/asterisk-base/files/asterisk.service-1.conf
new file mode 100644
index 000000000000..d94a08d78190
--- /dev/null
+++ b/net-misc/asterisk-base/files/asterisk.service-1.conf
@@ -0,0 +1,10 @@
+# Uncomment the following 7 lines to start asterisk with a console on tty7
+#
+# Warning! Use only for debugging, this is a potential security issue!
+#
+# [Service]
+# ExecStart=/usr/sbin/asterisk -f -c -C /etc/asterisk/asterisk.conf
+# TTYPath=/dev/tty7
+# StandardInput=tty
+# StandardOutput=tty
+# StandardError=tty
diff --git a/net-misc/asterisk-base/files/asterisk_wrapper-1 b/net-misc/asterisk-base/files/asterisk_wrapper-1
new file mode 100644
index 000000000000..1a85eccf9b25
--- /dev/null
+++ b/net-misc/asterisk-base/files/asterisk_wrapper-1
@@ -0,0 +1,227 @@
+#! /bin/sh
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+progname="$(basename "$0")"
+
+T="$(getopt -o "h" --long "help,corecompress:,corerename:,crashemail:,dumpcore:,instance:,maxfd:,nicelevel:,restartdelay:,rundir:,syslog,tty:" -n "$progname" -- "$@")"
+eval set -- "${T}"
+
+# bash builtins are special ...
+echo_e="$([ "${SHELL}" = "/bin/bash" ] && echo "echo -e" || echo echo)"
+
+rundir=/run/asterisk
+restartdelay=5
+nicelevel=0
+maxfd=4096
+dumpcore=0
+unset tty instance syslog corecompress corerename crashemail
+
+usage() {
+	cat <<USAGE
+USAGE: $progname [options] -- asterisk options"
+OPTIONS:
+	-h|--help
+		Output this text and exit.
+	--corecompress[=tool]
+		asterisk's address space can get quite large, compressing the core dumps can
+		save significant space, especially if asterisk core dumps frequently.
+	--corerename pattern
+		It's assumed core files (if enabled) will go into PWD, this specifies a
+		rename pattern.  The following % codes are recognised:
+			%h - hostname
+			%D - date in format YYYYMMDD
+			%T - time in format HHMMSS
+		It must be mentioned that if kernel.core_pattern (sysctl) is modified
+		from the default 'core' value this option is unlikely to work.
+	--crashemail email@address
+		This will send an email whenver asterisk crashes (does not terminate
+		cleanly with a zero exit code).  You need a working sendmail binary.
+	--dumpcore sizelimit
+		Maximum size of core limit, or the word unlimited.  Default is disabled
+		(sizelimit of 0).
+	--instance name
+		Updated label for sylog logger.
+	--maxfd maxfd
+		Sets the maximum number of file descriptors (default 4096).
+	--nicelevel nicelevel
+		Will set the asterisk nice level to the specified value.
+	--restartdelay delay_in_seconds
+		Number of seconds to wait before attempting to restart asterisk.  This helps
+		to avoid tight-loop crashes.  Defaults to 5s. Minimum 1.
+	--rundir path
+		Where to store the asterisk asterisk_wrapper.pid file.  In order to terminate the
+		wrapper (when asterisk next terminates), remove this file.
+	--syslog
+		Pass to redirect output to syslog rather than using stdout and stderr.
+	--tty tty
+		If asterisk should be attached to a TTY device, then pass this, eg --tty /dev/tty8.
+		Use of this is not recommended in general.
+
+NOTE:  There are some quirks with bash getopt shunting non-options prior to --
+	to asterisk options, so be careful of this.  Typically stuff will break.
+USAGE
+}
+
+matchreg() {
+	local v=$1
+	shift
+	echo "$v" | grep -q "$@"
+}
+
+while [ "$1" != "--" ]; do
+	case "$1" in
+			--corecompress|--corerename|--crashemail|--dumpcore|--instance|--maxfd|--nicelevel|--restartdelay|--rundir|--tty)
+			eval "${1#--}=\"\${2}\""
+			shift 2
+			;;
+		--syslog)
+			eval "${1#--}=1"
+			shift
+			;;
+		--help|-h)
+			usage
+			exit 0
+			;;
+		*)
+			echo "BUG: Don't know how to process option $1." >&2
+			usage >&2
+			exit 1
+			;;
+	esac
+done
+shift # --
+
+if ! matchreg "${restartdelay}" "^[1-9][0-9]*$"; then
+	echo "Invalid --restartdelay value ${restartdelay}, resetting to 5." >&2
+	restartdelay=5
+fi
+
+if ! matchreg "${maxfd}" "^[1-9][0-9]*$"; then
+	echo "Invalid --maxfd value, resetting to 4096." >&2
+	maxfd=4096
+fi
+
+if [ $maxfd -lt 1024 ]; then
+	echo "maxfd is guaranteed too low, bumping to at least 1024" >&2
+	maxfd=1024
+fi
+
+if [ -n "${nicelevel}" ] && ! matchreg "${nicelevel}" -E "^-?[0-9]+$"; then
+	echo "Invalid --nicelevel which much be a valid integer (values from -20 to 20 makes sense)."
+	exit 1
+fi
+
+if [ -n "${corecompress}" -a ! -x "${corecompress}" ]; then
+	corecompress=$(which "${corecompress}" 2>/dev/null)
+	[ -z "${corecompress}" ] && echo "Error locating core compression tool, disabling core compression." >&2
+fi
+
+# Before here will still be output (potentially munged, to the terminal).
+if [ -n "${syslog}" ]; then
+	tdir="$(mktemp -d)"
+	tfifo="${tdir}/asterisk_wrapper.logger.fifo"
+	mkfifo "${tfifo}"
+	logger -t "asterisk_wrapper${instance:+:}${instance}" --id=$$ >/dev/null 2>&1 <"${tfifo}" &
+	exec 1>"${tfifo}"
+	exec 2>&1
+
+	rm "${tfifo}"
+	rmdir "${tdir}"
+fi
+
+echo "Initializing ${progname}"
+
+cleanup(){
+	# There is a tiny race here, if this gets replaced inbetween the read and the rm.
+	# To fix this is quite complex in that we need to keep an fd, compare inode numbers
+	# and manage flock's.
+	[ -r "${rundir}/${progname}.pid" ] && \
+		[ "$(cat "${rundir}/${progname}.pid")" = $$ ] && \
+		rm "${rundir}/${progname}.pid"
+}
+trap cleanup EXIT
+
+# We could be clobbering an old version's pid, in which case it'll just terminate on
+# it's next iteration.  Towards this end, if asterisk.pid exists, attempt to find it's
+# config file and request a core stop when convenient so that we can take over.
+echo $$ > "${rundir}/${progname}.pid"
+if [ -r "${rundir}/asterisk.pid" ]; then
+	ast_pid="$(cat "${rundir}/asterisk.pid")"
+	[ -r "/proc/${ast_pid}/cmdline" ] && ast_conf="$(tr '\0' '\n' < "/proc/${ast_pid}/cmdline" | grep -A1 '^-C$' | tail -n1)" && /usr/sbin/asterisk -C "${ast_conf:-/etc/asterisk/asterisk.conf}" -rx "core stop when convenient"
+	# We may hit a few (depending on how busy the server is a great many number) loop failures still ...
+fi
+
+prlimit --core=${dumpcore} --pid=$$
+prlimit --nofile=${maxfd} --pid=$$
+
+ast_cmd=/usr/sbin/asterisk
+if [ -n "${nicelevel}" ]; then
+	ast_cmd="nice -n ${nicelevel} ${ast_cmd}"
+fi
+
+while [ -r "${rundir}/${progname}.pid" ]; do
+	# Another instance is looking to replace us, so terminate.
+	if [ "$(cat "${rundir}/${progname}.pid")" != $$ ]; then
+		break
+	fi
+
+	echo "Starting asterisk with ${ast_cmd} $*"
+	if [ -n "${tty+yes}" ]; then
+		/bin/stty -F "${tty}" sane
+		${ast_cmd} "$@" >"${tty}" 2>&1 <"${tty}"
+		result=$?
+	else
+		# Purposefully leave stderr alone, this will under certain odd cases (like exceptions,
+		# and other odd cases logged from glibc) result in those logs at least being captured
+		# in syslog.
+		${ast_cmd} "$@" </dev/null >/dev/null
+		result=$?
+	fi
+
+	if [ "$result" -eq 0 ]; then
+		echo "Asterisk terminated normally."
+		break
+	fi
+
+	if [ "$result" -gt 128 ]; then
+		signal="$(( result - 128 ))"
+		signame="$(kill -l $signal 2>/dev/null)"
+		MSG="Asterisk terminated with Signal: $signal (SIG${signame:-???})"
+
+		# TODO: figure out how to use /proc/sys/kernel/core_pattern here, but if someone is using
+		# that, chances are they're already dealing with what we want here.
+		if [ -r core ]; then
+			if [ -n "${corerename+yes}" ]; then
+				core_target="$(echo "${core_pattern}" | sed -e "s/%h/$(hostname)/" \
+					-e "s/%D/$(date +%Y%m%d)/" -e "s/%T/$(date +%H%M%S)/")"
+				mv core "${core_target}"
+				core_target=$(readlink -f "${core_target}")
+			else
+				core_target=$(readlink -f core)
+			fi
+
+			if [ -n "${corecompress}" && -x "${corecompress}" ]; then
+				"${corecompress}" "${core_target}"
+			fi
+
+			MSG="${MSG}\r\nCore dumped: ${core_target}"
+		fi
+	else
+		MSG="Asterisk terminated with return code: $result"
+	fi
+
+	[ -n "${tty+yes}" ] \
+		&& echo "${MSG}" >"${tty}" \
+		|| echo "${MSG}"
+
+	if [ -n "${crashemail+yes}" && -x /usr/sbin/sendmail ]; then
+		$echo_e -n "Subject: Asterisk crashed\r\n${MSG}\r\n" |\
+			 /usr/sbin/sendmail "${crashemail}"
+	fi
+	echo "Restarting asterisk after ${restartdelay}s ..."
+	sleep "${restartdelay}"
+done
+
+echo "Terminating $progname."
+exit 0
diff --git a/net-misc/asterisk-base/files/confd-1 b/net-misc/asterisk-base/files/confd-1
new file mode 100644
index 000000000000..c350b7e9161d
--- /dev/null
+++ b/net-misc/asterisk-base/files/confd-1
@@ -0,0 +1,169 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+#
+# Additional options for asterisk
+#
+# see "asterisk -h" for a list of options
+#
+# No default.
+#
+#ASTERISK_OPTS=""
+
+#
+# User and group to run asterisk as
+#
+# Value: double-colon separated list of user and group, or empty to run as root:
+#
+#
+# "asterisk:asterisk" to run as user "asterisk" and group "asterisk"
+# "asterisk" to run as user "asterisk" and all groups that user "asterisk" is a member of
+# ":asterisk" to run as user "root" and group "asterisk"
+#
+# Default: asterisk
+#
+#ASTERISK_USER="asterisk"
+
+#
+# Nicelevel
+#
+# Set the priority of the asterisk process
+#
+# Value: (highest) -20..19 (lowest)
+#
+# No default (leave scheduling to be system default).
+#
+#ASTERISK_NICE="19"
+
+# Send crash notifications emails to this address
+# (needs a working mail service and /usr/sbin/sendmail to do so (e.g. ssmtp))
+#
+# Value: Email address or empty to disable
+#
+# No default.
+#
+#ASTERISK_NOTIFY_EMAIL="root"
+
+#
+# Send asterisk's output to this terminal
+#
+# Value: Full path to device node or a number
+#
+# No default.
+#
+#ASTERISK_TTY="/dev/tty9"
+
+#
+# Start an asterisk console on the terminal specified by ASTERISK_TTY
+#
+# Warning! Use only for debugging, this is a potential security issue!
+#
+# Value: yes/no
+#
+# Default: no
+#
+#ASTERISK_CONSOLE="no"
+
+#
+# Maximum size of core files.
+#
+# Value: Size in bytes, unlimited for no limit or empty to disable.
+#
+# Default:  do not generate core dumps
+#
+#ASTERISK_CORE_SIZE="unlimited"
+
+#
+# ASTERISK_CORE_DIR
+#
+# Value: Directory (will be created if non-existant).
+#
+# Default: /tmp
+#
+#ASTERISK_CORE_DIR="/var/lib/asterisk/core"
+
+#
+# Max number of filedescriptors.  asterisk can trivially run out of
+# descriptors.  In most (SIP) cases it uses at least four descriptors per call,
+# and this is a conservative value.
+#
+# Value: Number of descriptors
+#
+# Default: leave system default in place.
+#
+ASTERISK_MAX_FD="4096"
+
+#
+# Delay time before restarting asterisk after a crash.
+#
+# Value: Number of seconds to sleep after a crash before restarting.
+#
+# Default: 5
+#
+#ASTERISK_RESTART_DELAY=5
+
+#
+# The stop mechanism to use.  Asterisk can do gracefully, when convenient or now.
+# By default we expect you to want to stop as soon as possible, so we default
+#
+# Default: gracefully
+#
+#ASTERISK_STOP_METHOD="when convenient"
+
+#
+# By default the init script waits two minutes for asterisk to stop.  This allows
+# you to change that, or even completely disable and go into wait for ever mode (-1).
+# The value here is in seconds.
+#
+# Default: 120
+#
+#ASTERISK_STOP_TIMEOUT=-1
+
+#
+# ASTERISK_CONFDIR
+#
+# If you'd like an alternative folder to /etc/${RC_SVCNAME} to be used
+# (typically /etc/asterisk) to be used for configuration.
+#
+# Default: /etc/${RC_SVCNAME}
+#
+#ASTERISK_CONFDIR="/etc/foo/bar"
+
+# ASTERISK_CACHEDIR
+#
+# Value: Directory to which astcachedir in asterisk.conf is set.
+#
+# Default: /var/cache/asterisk
+#
+#ASTERISK_CACHEDIR="/var/cache/asterisk"
+
+
+#
+# Normally the init script will not wait for asterisk to fully boot.  With this
+# setting set to yes/true/1 it will issue a "core waitfullybooted" directly
+# after starting asterisk, and wait for asterisk to start up completely.  This
+# is useful in certain conditions where other software requires asterisk to be
+# properly started before they themselves can be started.
+#
+# Default:  no
+#
+#ASTERISK_WAITBOOTED=yes
+
+#
+# When core-dumping, the default was to generate core-$(date +%Y%m%d-%H%M%S).
+# In certain highly unusual configurations it's helpful to also get the
+# hostname into this filename.  By enabling this option the wrapper loop will
+# adjust the core file to be named core-$(hostname)-$(date ...).
+#
+# Default: no
+#
+#ASTERISK_CORE_USEHOSTNAME=yes
+
+#
+# When core-dumping, the default is to not compress these files.  However, as it turns
+# out, compressing these core files can save significant amount of space, so if you
+# want them compressed, specify the tool to use here.
+#
+# Default: do not compress
+#
+#ASTERISK_CORE_COMPRESS=bzip2
diff --git a/net-misc/asterisk-base/files/initd-1 b/net-misc/asterisk-base/files/initd-1
new file mode 100644
index 000000000000..7d48b36456bf
--- /dev/null
+++ b/net-misc/asterisk-base/files/initd-1
@@ -0,0 +1,311 @@
+#!/sbin/openrc-run
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+extra_started_commands="forcestop reload"
+
+depend() {
+	need net
+	use nscd dns dahdi mysql postgresql slapd capi
+}
+
+is_running() {
+	[ -r "${ast_rundir}/asterisk.pid" ] || return 1
+	PID="$(cat "${ast_rundir}/asterisk.pid")"
+	[ -d "/proc/${PID}" ] || return 1
+	EXE="$(readlink -f /proc/${PID}/exe)"
+	EXE="${EXE% (deleted)}" # in case asterisk got upgraded and we're still looking at an old one.
+	[ "${EXE}" = /usr/sbin/asterisk ] || return 1 # pid got re-used for another process.
+
+	# PID reported in pidfile is active, and is still an asterisk instance.
+	return 0
+}
+
+# Sets up a few variables for us for use
+# ast_instancename: eg, asterisk when RC_SVCNAME=asterisk, or asterisk(foo) when asterisk.foo.
+# ast_rundir: directory to be used as run folder (pid and ctl files).
+setup_svc_variables()
+{
+	local t
+
+	ast_instancename=asterisk
+	ast_rundir=/run/${RC_SVCNAME}
+	ast_logdir=/var/log/${RC_SVCNAME}
+	ast_confdir=/etc/${RC_SVCNAME}
+	ast_cachedir=/var/cache/asterisk
+	ast_stop_timeout=120
+	ast_stop_method="gracefully"
+
+	if [ "${RC_SVCNAME}" != "asterisk" ]; then
+		t="${RC_SVCNAME#asterisk.}"
+		if [ "${RC_SVCNAME}" = "${t}" ]; then
+			eerror "Invalid SVCNAME of ${RC_SVCNAME}, must be of the format asterisk.name."
+			return 1
+		fi
+		ast_instancename="${ast_instancename}(${t})"
+	fi
+
+	[ -n "${ASTERISK_RUNDIR}" ] && ast_rundir="${ASTERISK_RUNDIR}"
+	[ -n "${ASTERISK_LOGDIR}" ] && ast_logdir="${ASTERISK_LOGDIR}"
+	[ -n "${ASTERISK_CONFDIR}" ] && ast_confdir="${ASTERISK_CONFDIR}"
+	[ -n "${ASTERISK_CACHEDIR}" ] && ast_confdir="${ASTERISK_CACHEDIR}"
+	[ -n "${ASTERISK_STOP_TIMEOUT}" ] && ast_stop_timeout="${ASTERISK_STOP_TIMEOUT}"
+	case "${ASTERISK_STOP_METHOD}" in
+		gracefully|when\ convenient|now)
+			ast_stop_method="${ASTERISK_STOP_METHOD}"
+		;;
+	esac
+	ast_group=
+	if [ -n "${ASTERISK_USER}" ]; then
+		ast_user="${ASTERISK_USER%%:*}"
+		if [ "${ast_user}" != "${ASTERISK_USER}" ]; then
+			ast_group="${ASTERISK_USER#*:}"
+			ast_group="${ast_group%%:*}"
+		fi
+	fi
+
+	[ -z "${ast_user}" ] && ast_user=asterisk
+
+	ast_pgroup="$(getent group $(getent passwd "${ast_user}" | awk -F: '{ print $4 }') | sed -re 's/:.*//')"
+
+	return 0
+}
+
+start() {
+	local OPTS PID
+	local tmp x
+
+	local OPTS ARGS WRAPPER_OPTS
+
+	setup_svc_variables || return $?
+
+	ebegin "Starting ${ast_instancename} PBX"
+
+	eindent
+
+	# filter (redundant) arguments
+	OPTS="$(echo "${ASTERISK_OPTS}" | sed -re "s:-[cfF]::g")"
+
+	# default options
+	OPTS="${OPTS}${OPTS:+ }-C ${ast_confdir}/asterisk.conf -f"  # don't fork / detach breaks wrapper script...
+
+	WRAPPER_OPTS="--syslog"
+	if [ "${RC_SVCNAME}" != "asterisk" ]; then
+		WRAPPER_OPTS="${WRAPPER_OPTS} --instance ${RC_SVCNAME#asterisk.}"
+	fi
+	WRAPPER_OPTS="${WRAPPER_OPTS} --rundir ${ast_rundir}"
+	
+	# ensure that ASTERISK_RESTART_DELAY is integer.
+	ASTERISK_RESTART_DELAY="$(echo "${ASTERISK_RESTART_DELAY}" | sed -re 's/^([0-9]*).*/\1/')"
+	[ -z "${ASTERISK_RESTART_DELAY}" ] && ASTERISK_RESTART_DELAY=5
+	WRAPPER_OPTS="${WRAPPER_OPTS} --restartdelay ${ASTERISK_RESTART_DELAY}"
+
+	if [ -n "${ASTERISK_CORE_SIZE}" ] &&
+	   [ "${ASTERISK_CORE_SIZE}" != "0" ]; then
+		WRAPPER_OPTS="${WRAPPER_OPTS} --dumpcore ${ASTERISK_CORE_SIZE}"	
+		OPTS="${OPTS} -g"
+
+		if [ -n "${ASTERISK_CORE_DIR}" ] && \
+		   [ ! -d "${ASTERISK_CORE_DIR}" ]
+		then
+			checkpath -d -m 0755 -o ${ast_user}:${ast_group} "${ASTERISK_CORE_DIR}"
+		fi
+		ASTERISK_CORE_DIR="${ASTERISK_CORE_DIR:-/tmp}"
+
+		cd "${ASTERISK_CORE_DIR}"
+		einfo "Core dump size            : ${ASTERISK_CORE_SIZE}"
+		einfo "Core dump location        : ${ASTERISK_CORE_DIR}"
+
+		if [ -n "${ASTERISK_CORE_COMPRESS}" ]; then
+			einfo "Core compression tool     : ${ASTERISK_CORE_COMPRESS}"
+			WRAPPER_OPTS="${WRAPPER_OPTS} --corecompress ${ASTERISK_CORE_COMPRESS}"
+		fi
+
+		if yesno "${ASTERISK_CORE_USEHOSTNAME}"; then
+			WRAPPER_OPTS="${WRAPPER_OPTS} --corerename core-%H-%D-%T"
+		else
+			WRAPPER_OPTS="${WRAPPER_OPTS} --corerename core-%D-%T"
+		fi
+	else
+		cd /
+	fi
+
+	if [ -n "${ASTERISK_MAX_FD}" ]; then
+		WRAPPER_OPTS="${WRAPPER_OPTS} --maxfd ${ASTERISK_MAX_FD}"
+		einfo "Max open filedescriptors  : ${ASTERISK_MAX_FD}"
+	fi
+
+	if [ -n "${ASTERISK_NICE}" ]; then
+		if [ ${ASTERISK_NICE} -ge -20 ] && \
+		   [ ${ASTERISK_NICE} -le  19 ]; then
+			einfo "Nice level                : ${ASTERISK_NICE}"
+			WRAPPER_OPTS="${WRAPPER_OPTS} --nicelevel ${ASTERISK_NICE}"
+		else
+			eerror "Nice value must be between -20 and 19"
+			return 1
+		fi
+	fi
+
+	if [ -n "${ASTERISK_NOTIFY_EMAIL}" ]; then
+		if [ -x /usr/sbin/sendmail ]; then
+			einfo "Email notifications go to : ${ASTERISK_NOTIFY_EMAIL}"
+			WRAPPER_OPTS="${WRAPPER_OPTS} --crashemail ${ASTERISK_NOTIFY_EMAIL}"
+		else
+			ewarn "Notifications disabled, /usr/sbin/sendmail doesn't exist or is not executable!"
+		fi
+	fi
+
+	if [ -n "${ASTERISK_TTY}" ]; then
+		for x in "${ASTERISK_TTY}" \
+			 "/dev/tty${ASTERISK_TTY}" \
+			 "/dev/vc/${ASTERISK_TTY}"
+		do
+			if [ -c "${x}" ]; then
+				TTY="${x}"
+			fi
+		done
+		if [ -n "${TTY}" ]; then
+			einfo "Messages are sent to      : ${TTY}"
+			WRAPPER_OPTS="${WRAPPER_OPTS} --tty ${TTY}"
+		else
+			ewarn "ASTERISK_TTY=${TTY} ignored, not valid."
+		fi
+	fi
+
+	if yesno "${ASTERISK_CONSOLE}" && [ -n "${TTY}" ]; then
+		einfo "Starting Asterisk console : Yes"
+		OPTS="${OPTS} -c"
+	fi
+
+	if ! getent passwd "${ast_user}" >/dev/null 2>&1; then
+		eerror "Requested to run asterisk as ${ast_user}, which doesn't exist."
+		return 1
+	fi
+	OPTS="${OPTS} -U ${ast_user}"
+
+	if [ -n "${ast_group}" ] && ! getent group "${ast_group}" >/dev/null 2>&1; then
+		eerror "Requested to run ${ast_instancename} with group ${ast_group}, which doesn't exist."
+		return 1
+	fi
+	[ -n "${ast_group}" ] && OPTS="${OPTS} -G ${ast_group}"
+
+	if [ "${ast_user}" = root ]; then
+		ewarn "Starting asterisk as root is not recommended (SERIOUS SECURITY CONSIDERATIONS)."
+	elif [ "${ast_group}" = root ]; then
+		ewarn "Starting asterisk with group root is not recommended (SERIOUS SECURITY CONSIDERATIONS)."
+	fi
+
+	checkpath -d -m 0755 -o "${ast_user}:${ast_group}" "${ast_logdir}" "${ast_rundir}"
+	checkpath -d -m 0750 -o "${ast_user}:${ast_group}" "${ast_cachedir}"
+
+	einfo "Starting asterisk as      : ${ast_user}:${ast_group:-${ast_pgroup} (+supplementaries)}"
+	einfo "Wrapper options           : ${WRAPPER_OPTS}"
+	einfo "Asterisk options          : ${OPTS}"
+
+	/usr/sbin/asterisk_wrapper ${WRAPPER_OPTS} -- ${OPTS} &
+	result=$?
+
+	if [ $result -eq 0 ]; then
+		# 2 seconds should be enough for asterisk to start
+		sleep 2
+		is_running
+		result=$?
+
+		[ $result -eq 0 ] || wrapperstop
+	fi
+
+	eoutdent
+	eend $result
+
+	if [ $result -eq 0 ] && yesno "${ASTERISK_WAITBOOTED}"; then
+		if [ ! -r "${ast_rundir}/asterisk.ctl" ]; then
+			# asterisk can crash during startup ...
+			ebegin "Waiting for ctl file to appear"
+			while is_running && [ ! -r "${ast_rundir}/asterisk.ctl" ]; do
+				sleep 1
+			done
+			is_running
+			result=$?
+			eend $result
+		fi
+		if [ $result -eq 0 ]; then
+			ebegin "Waiting for ${ast_instancename} to fully boot"
+			/usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "core waitfullybooted" >/dev/null 2>&1
+			eend $?
+		fi
+	fi
+
+	return $result
+}
+
+wrapperstop() {
+	# Older path.
+	if [ -r "${ast_rundir}/wrapper_loop.running" ]; then
+		ebegin "Signalling ${ast_instancename} wrapper script to terminate"
+		rm "${ast_rundir}/wrapper_loop.running"
+		eend $?
+	fi
+
+	if [ -r "${ast_rundir}/asterisk_wrapper.pid" ]; then
+		ebegin "Signalling ${ast_instancename} wrapper script to terminate"
+		rm "${ast_rundir}/asterisk_wrapper.pid"
+		eend $?
+	fi
+
+	return 0
+}
+
+forcestop() {
+	setup_svc_variables || return $?
+
+	# Just to be sure - when we want to forcestop we should make it all tear down.
+	wrapperstop
+
+	ebegin "Stopping ${ast_instancename} PBX"
+	start-stop-daemon --stop --pidfile /run/asterisk/asterisk.pid
+	eend $?
+}
+
+stop() {
+	setup_svc_variables || return $?
+
+	wrapperstop
+
+	if ! is_running; then
+		eerror "${ast_instancename} is not running!"
+		return 0
+	fi
+
+	ebegin "Stopping ${ast_instancename} PBX ${ast_stop_method}"
+	/usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "core stop ${ast_stop_method}" >/dev/null 2>&1
+	# Now we have to wait until asterisk has _really_ stopped.
+	sleep 1
+	if is_running; then
+		einfon "Waiting for ${ast_instancename} to shutdown ."
+		local cnt=0
+		while is_running; do
+			cnt="$(expr $cnt + 2)"
+			if [ ${ast_stop_timeout} -gt 0 -a $cnt -gt ${ast_stop_timeout} ] ; then
+				echo
+				eend 1 "Failed waiting for ${ast_instancename} to stop."
+				return 1
+			fi
+			sleep 2
+			printf "."
+		done
+		echo
+	fi
+	eend 0
+}
+
+reload() {
+	setup_svc_variables || return $?
+
+	if is_running; then
+		ebegin "Requesting ${ast_instancename} to reload configuration"
+		/usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "module reload" >/dev/null 2>&1
+		eend $?
+	else
+		eerror "${ast_instancename} is not running!"
+	fi
+}
diff --git a/net-misc/asterisk-base/files/logrotate-1 b/net-misc/asterisk-base/files/logrotate-1
new file mode 100644
index 000000000000..2286efc1e7e9
--- /dev/null
+++ b/net-misc/asterisk-base/files/logrotate-1
@@ -0,0 +1,27 @@
+/var/log/asterisk/messages {
+	missingok
+	notifempty
+
+	postrotate
+		test -e /run/openrc/softlevel && /etc/init.d/asterisk --quiet status && /usr/sbin/asterisk -rnx "logger reload" || /bin/true
+		test -e /run/systemd/system && systemctl is-active --quiet asterisk.service && /usr/sbin/asterisk -rnx "logger reload" || /bin/true
+	endscript
+}
+
+/var/log/asterisk/debug /var/log/asterisk/full {
+	missingok
+	notifempty
+	daily
+
+	postrotate
+		test -e /run/openrc/softlevel && /etc/init.d/asterisk --quiet status && /usr/sbin/asterisk -rnx "logger reload" || /bin/true
+		test -e /run/systemd/system && systemctl is-active --quiet asterisk.service && /usr/sbin/asterisk -rnx "logger reload" || /bin/true
+	endscript
+}
+
+/var/log/asterisk/cdr-csv/*.csv /var/log/asterisk/cdr-custom/*.csv /var/log/asterisk/queue_log {
+	missingok
+	notifempty
+	weekly
+	rotate 52
+}
diff --git a/net-misc/asterisk-base/files/tmpfiles-1.conf b/net-misc/asterisk-base/files/tmpfiles-1.conf
new file mode 100644
index 000000000000..224d060a3c92
--- /dev/null
+++ b/net-misc/asterisk-base/files/tmpfiles-1.conf
@@ -0,0 +1,2 @@
+d /run/asterisk 0750 asterisk asterisk
+d /var/cache/asterisk 0750 asterisk asterisk
diff --git a/net-misc/asterisk-base/metadata.xml b/net-misc/asterisk-base/metadata.xml
new file mode 100644
index 000000000000..6aebbc46f559
--- /dev/null
+++ b/net-misc/asterisk-base/metadata.xml
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "https://www.gentoo.org/dtd/metadata.dtd">
+<pkgmetadata>
+	<maintainer type="person" proxied="yes">
+		<email>jaco@uls.co.za</email>
+		<name>Jaco Kroon</name>
+	</maintainer>
+	<maintainer type="project" proxied="proxy">
+		<email>proxy-maint@gentoo.org</email>
+		<name>Proxy Maintainers</name>
+	</maintainer>
+</pkgmetadata>