media-libs/opencolorio: Remove ebuild with errors

2 files changed, 0 insertions, 258 deletions

diff --git a/media-libs/opencolorio/files/opencolorio-1.1.0-cmake-fixes.patch b/media-libs/opencolorio/files/opencolorio-1.1.0-cmake-fixes.patch
deleted file mode 100644
index 9cb3500d9dab..000000000000
--- a/media-libs/opencolorio/files/opencolorio-1.1.0-cmake-fixes.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-diff -purN a/CMakeLists.txt b/CMakeLists.txt
---- a/CMakeLists.txt	2017-11-29 22:51:15.000000000 +0000
-+++ b/CMakeLists.txt	2017-12-27 16:49:51.461300828 +0000
-@@ -59,6 +59,7 @@ endif()
- include(ParseArguments)
- include(OCIOMacros)
- include(ExternalProject)
-+include(GNUInstallDirs)
- 
- enable_language(CXX)
- 
-@@ -531,7 +532,7 @@ endif()
- configure_file(${CMAKE_SOURCE_DIR}/share/ocio/setup_ocio.sh.in
-     ${CMAKE_CURRENT_BINARY_DIR}/share/ocio/setup_ocio.sh @ONLY)
- 
--INSTALL(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/share/ocio/setup_ocio.sh DESTINATION share/ocio/)
-+INSTALL(PROGRAMS ${CMAKE_CURRENT_BINARY_DIR}/share/ocio/setup_ocio.sh DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/ocio/)
- 
- ###############################################################################
- ### CPACK ###
-@@ -646,4 +647,4 @@ file(WRITE "${CMAKE_BINARY_DIR}/OpenColo
-     message(STATUS OPENCOLORIO_FOUND=\${OPENCOLORIO_FOUND})
-     "
- )
--install(FILES "${CMAKE_BINARY_DIR}/OpenColorIOConfig.cmake" DESTINATION .)
-+install(FILES "${CMAKE_BINARY_DIR}/OpenColorIOConfig.cmake" DESTINATION ${CMAKE_INSTALL_LIBDIR}/CMake)
-diff -purN a/docs/CMakeLists.txt b/docs/CMakeLists.txt
---- a/docs/CMakeLists.txt	2017-11-29 22:51:15.000000000 +0000
-+++ b/docs/CMakeLists.txt	2017-12-27 16:53:28.976491353 +0000
-@@ -1,91 +1,5 @@
- 
- ###############################################################################
--### External Doc Apps ###
--
--if (WIN32)
--    # Workaround to mimic *nix '> PYTHONPATH=XXX CMD' 
--    #  on windows, it becomes  '> set PYTHONPATH=XXX \n call CMD'
--    #   '\n' is here because '\\&' does not work.
--    set(PYT_PRE_CMD set PYTHONPATH=${PYTHONPATH} "\n" call )
--    # Unfortunately some windows tools require to have
--    #  the paths with the '\' (not working with '//').
--    set(PYT_LIB_OUTPUT ${EXTDIST_ROOT})
--    string(REGEX REPLACE "/" "\\\\" PYT_LIB_OUTPUT ${PYT_LIB_OUTPUT})
--    set(PYT_EXTDIST_BINPATH ${EXTDIST_BINPATH})
--    string(REGEX REPLACE "/" "\\\\" PYT_EXTDIST_BINPATH ${PYT_EXTDIST_BINPATH})
--else()
--    set(PYT_PRE_CMD PYTHONPATH=${PYTHONPATH})
--    set(PYT_LIB_OUTPUT ${EXTDIST_ROOT})
--    set(PYT_EXTDIST_BINPATH ${EXTDIST_BINPATH})
--endif()
--
--# setuptools
--# https://pypi.python.org/pypi/setuptools
--set(SETUPTOOLS_VERSION 1.1.6)
--
--ExternalProject_Add(setuptools
--    URL ${CMAKE_SOURCE_DIR}/ext/setuptools-${SETUPTOOLS_VERSION}.tar.gz
--    BUILD_IN_SOURCE 1
--    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E make_directory ${EXTDIST_PYTHONPATH}
--    BUILD_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py build
--    INSTALL_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py install --prefix=${PYT_LIB_OUTPUT}
--    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/setuptools-prefix/src/setuptools
--)
--
--# docutils
--# https://pypi.python.org/pypi/docutils
--set(DOCUTILS_VERSION 0.11)
--ExternalProject_Add(docutils
--    DEPENDS setuptools
--    URL ${CMAKE_SOURCE_DIR}/ext/docutils-${DOCUTILS_VERSION}.tar.gz
--    BUILD_IN_SOURCE 1
--    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E make_directory ${EXTDIST_PYTHONPATH}
--    BUILD_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py build
--    INSTALL_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py install --prefix=${PYT_LIB_OUTPUT}
--    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/docutils-prefix/src/docutils
--)
--
--# jinja2
--# https://pypi.python.org/pypi/Jinja2
--set(JINJA2_VERSION 2.7.1)
--ExternalProject_Add(Jinja2
--    DEPENDS setuptools
--    URL ${CMAKE_SOURCE_DIR}/ext/Jinja2-${JINJA2_VERSION}.tar.gz
--    BUILD_IN_SOURCE 1
--    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E make_directory ${EXTDIST_PYTHONPATH}
--    BUILD_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py build
--    INSTALL_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py install --prefix=${PYT_LIB_OUTPUT}
--    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/Jinja2-prefix/src/Jinja2
--)
--
--# Pygments
--# https://pypi.python.org/pypi/Pygments
--set(PYGMENTS_VERSION 1.6)
--ExternalProject_Add(Pygments
--    DEPENDS setuptools
--    URL ${CMAKE_SOURCE_DIR}/ext/Pygments-${PYGMENTS_VERSION}.tar.gz
--    BUILD_IN_SOURCE 1
--    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E make_directory ${EXTDIST_PYTHONPATH}
--    BUILD_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py build
--    INSTALL_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py install --prefix=${PYT_LIB_OUTPUT}
--    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/Pygments-prefix/src/Pygments
--)
--
--# sphinx
--# https://pypi.python.org/pypi/Sphinx
--set(SPHINX_VERSION 1.2b3)
--ExternalProject_Add(Sphinx
--    DEPENDS setuptools docutils Jinja2 Pygments
--    URL ${CMAKE_SOURCE_DIR}/ext/Sphinx-${SPHINX_VERSION}.tar.gz
--    PATCH_COMMAND patch -p1 < ${CMAKE_SOURCE_DIR}/ext/Sphinx-${SPHINX_VERSION}.patch
--    BUILD_IN_SOURCE 1
--    CONFIGURE_COMMAND ${CMAKE_COMMAND} -E make_directory ${EXTDIST_PYTHONPATH}
--    BUILD_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py build
--    INSTALL_COMMAND ${PYT_PRE_CMD} ${PYTHON} setup.py install --prefix=${PYT_LIB_OUTPUT} --install-scripts=${PYT_EXTDIST_BINPATH}
--    WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/Sphinx-prefix/src/Sphinx
--)
--
--###############################################################################
- ### Create Doc Targets ###
- 
- message(STATUS "Create sphinx conf.py from conf.py.in")
-@@ -122,7 +36,7 @@ else()
- endif()
- 
- add_custom_target(doc ALL
--    COMMAND ${PYT_PRE_CMD} ${EXTDIST_BINPATH}/sphinx-build -b html . ${CMAKE_CURRENT_BINARY_DIR}/build-html
-+    COMMAND sphinx-build -b html . ${CMAKE_CURRENT_BINARY_DIR}/build-html
-     DEPENDS
-         ${DEPLIBS}
-         ${CMAKE_BINARY_DIR}/docs/conf.py
-@@ -133,20 +47,18 @@ add_custom_target(doc ALL
-     COMMENT "Building html docs"
-     SOURCES ${DOCFILES})
- 
--# note: ExternalProject will not build when added to a add_custom_target this
--# works around this problem. This seems to be fixed in the cmake ^HEAD
--add_dependencies(doc Sphinx) 
--
- install(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/build-html/
--        DESTINATION ${CMAKE_INSTALL_PREFIX}/share/doc/OpenColorIO/html
-+        DESTINATION ${CMAKE_INSTALL_DOCDIR}/html
-         PATTERN .* EXCLUDE
- )
- 
-+if(OCIO_BUILD_PDF_DOCS)
-+
- find_package(LATEX)
- if(PDFLATEX_COMPILER)
-     
-     add_custom_target(latex
--        COMMAND ${PYT_PRE_CMD} ${EXTDIST_BINPATH}/sphinx-build -b latex . ${CMAKE_CURRENT_BINARY_DIR}/build-latex
-+        COMMAND sphinx-build -b latex . ${CMAKE_CURRENT_BINARY_DIR}/build-latex
-         DEPENDS
-             OpenColorIO
-             ${CMAKE_BINARY_DIR}/docs/conf.py
-@@ -156,7 +68,6 @@ if(PDFLATEX_COMPILER)
-             ${RSTDOC_OUTPUT}
-         COMMENT "Building latex doc"
-         SOURCES ${DOCFILES})
--    add_dependencies(latex Sphinx)
-     
-     add_custom_target(pdf ALL
-         COMMAND ${PDFLATEX_COMPILER} OpenColorIO.tex
-@@ -166,6 +77,8 @@ if(PDFLATEX_COMPILER)
-     add_dependencies(pdf latex)
-     
-     install(FILES ${CMAKE_CURRENT_BINARY_DIR}/build-latex/OpenColorIO.pdf
--            DESTINATION ${CMAKE_INSTALL_PREFIX}/share/doc/OpenColorIO/)
-+            DESTINATION ${CMAKE_INSTALL_DOCDIR})
-     
- endif()
-+
-+endif()
diff --git a/media-libs/opencolorio/opencolorio-1.1.0.ebuild b/media-libs/opencolorio/opencolorio-1.1.0.ebuild
deleted file mode 100644
index c1504ae4a464..000000000000
--- a/media-libs/opencolorio/opencolorio-1.1.0.ebuild
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-# Compatibility with Python 3 is declared by upstream, but it is broken in fact, check on bump
-PYTHON_COMPAT=( python{2_7,3_4,3_5,3_6} )
-
-inherit cmake-utils python-single-r1 vcs-snapshot
-
-DESCRIPTION="A color management framework for visual effects and animation"
-HOMEPAGE="http://opencolorio.org/"
-
-SRC_URI="https://github.com/imageworks/OpenColorIO/archive/v${PV}.tar.gz \
-		-> ${P}.tar.gz"
-
-LICENSE="BSD"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="doc opengl pdf python cpu_flags_x86_sse2 test"
-REQUIRED_USE="
-	doc? ( python )
-	python? ( ${PYTHON_REQUIRED_USE} )"
-
-RDEPEND="
-	opengl? (
-		media-libs/lcms:2
-		media-libs/openimageio
-		media-libs/glew:=
-		media-libs/freeglut
-		virtual/opengl
-	)
-	python? ( ${PYTHON_DEPS} )
-	>=dev-cpp/yaml-cpp-0.5
-	dev-libs/tinyxml"
-
-DEPEND="${RDEPEND}
-	virtual/pkgconfig
-	doc? (
-		pdf? ( dev-python/sphinx[latex,${PYTHON_USEDEP}] )
-		!pdf? ( dev-python/sphinx[${PYTHON_USEDEP}] )
-	)"
-
-# Restricting tests, bugs #439790 and #447908
-RESTRICT="test"
-
-PATCHES=( "${FILESDIR}/${P}-cmake-fixes.patch" )
-
-pkg_setup() {
-	use python && python-single-r1_pkg_setup
-}
-
-src_prepare() {
-	cmake-utils_src_prepare
-
-	use python && python_fix_shebang .
-}
-
-src_configure() {
-	# Missing features:
-	# - Truelight and Nuke are not in portage for now, so their support are disabled
-	# - Java bindings was not tested, so disabled
-	# Notes:
-	# - OpenImageIO is required for building ociodisplay and ocioconvert (USE opengl)
-	# - OpenGL, GLUT and GLEW is required for building ociodisplay (USE opengl)
-	local mycmakeargs=(
-		-DOCIO_BUILD_JNIGLUE=OFF
-		-DOCIO_BUILD_NUKE=OFF
-		-DOCIO_BUILD_SHARED=ON
-		-DOCIO_BUILD_STATIC=OFF
-		-DOCIO_STATIC_JNIGLUE=OFF
-		-DOCIO_BUILD_TRUELIGHT=OFF
-		-DUSE_EXTERNAL_LCMS=ON
-		-DUSE_EXTERNAL_TINYXML=ON
-		-DUSE_EXTERNAL_YAML=ON
-		-DOCIO_BUILD_DOCS="$(usex doc)"
-		-DOCIO_BUILD_APPS="$(usex opengl)"
-		-DOCIO_BUILD_PDF_DOCS="$(usex pdf)"
-		-DOCIO_BUILD_PYGLUE="$(usex python)"
-		-DOCIO_USE_SSE="$(usex cpu_flags_x86_sse2)"
-		-DOCIO_BUILD_TESTS="$(usex test)"
-		-DCMAKE_INSTALL_DOCDIR="share/doc/${PF}"
-	)
-	cmake-utils_src_configure
-}