Adapt tst-catgets to changes in tst-gettext

3 files changed, 74 insertions, 105 deletions

diff --git a/catgets/Makefile b/catgets/Makefile
index a95028f2dd..c11edd33c2 100644
--- a/catgets/Makefile
+++ b/catgets/Makefile
@@ -70,8 +70,8 @@ $(objpfx)de/libc.cat: $(objpfx)de.msg $(objpfx)gencat
 $(objpfx)tst-catgets.out: $(objpfx)de/libc.cat
 
 # Generate a non-simple input file.
-$(objpfx)de.msg: $(..)po/de.po
-	LC_ALL=C sed -f xopen-msg.sed $< > $@
+$(objpfx)de.msg: xopen-msg.awk $(..)po/de.po
+	LC_ALL=C $(AWK) -f $^ $< > $@
 
 $(objpfx)test-gencat.out: test-gencat.sh $(objpfx)test-gencat \
 			  $(objpfx)sample.SJIS.cat
diff --git a/catgets/xopen-msg.awk b/catgets/xopen-msg.awk
new file mode 100644
index 0000000000..43d421dbff
--- /dev/null
+++ b/catgets/xopen-msg.awk
@@ -0,0 +1,72 @@
+# xopen-msg.awk - Convert Uniforum style .po file to X/Open style .msg file
+# Copyright (C) 2012 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+#
+# The first directive in the .msg should be the definition of the
+# message set number.  We use always set number 1.
+#
+BEGIN {
+    print "$set 1 # Automatically created by xopen-msg.awk"
+    num = 0
+}
+
+#
+# The .msg file contains, other then the .po file, only the translations
+# but each given a unique ID.  Starting from 1 and incrementing by 1 for
+# each message we assign them to the messages.
+# It is important that the .po file used to generate the ../intl/msg.h file
+# (with po2test.awk) is the same as the one used here.  (At least the order
+# of declarations must not be changed.)
+#
+function output_message() {
+    # Ignore messages containing <PRI.*> which would have to be replaced
+    # by the correct format depending on the word size
+    if (msg && msg !~ /<PRI.*>/) {
+	if (msgtype == "msgid") {
+	    # We copy the original message as a comment into the .msg file.
+	    gsub(/\n/, "\n$ ", msg)
+	    printf "$ Original Message: %s\n", msg
+	} else {
+	    gsub(/\n/, "\\\n", msg)
+	    printf "%d %s\n", ++num, msg
+	}
+    }
+    msg = 0
+}
+
+$1 ~ "msg(id|str)" {
+    # Output collected message
+    output_message()
+    # Collect next message
+    msgtype = $1
+    sub(/^msg(id|str)[ \t]*"/, "", $0)
+    sub(/"$/, "", $0)
+    msg = $0
+    next
+}
+
+/^".*"/ {
+    # Append to current message
+    sub(/^"/, "", $0)
+    sub(/"$/, "", $0)
+    msg = msg "\n" $0
+    next
+}
+
+END {
+    # Output last collected message
+    output_message()
+}
diff --git a/catgets/xopen-msg.sed b/catgets/xopen-msg.sed
deleted file mode 100755
index d96a6d7358..0000000000
--- a/catgets/xopen-msg.sed
+++ /dev/null
@@ -1,103 +0,0 @@
-# po2msg.sed - Convert Uniforum style .po file to X/Open style .msg file
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-#
-# The first directive in the .msg should be the definition of the
-# message set number.  We use always set number 1.
-#
-1 {
-  i\
-$set 1 # Automatically created by po2msg.sed
-  h
-  s/.*/0/
-  x
-}
-#
-# We copy all comments into the .msg file.  Perhaps they can help.
-#
-/^#/ s/^#[ 	]*/$ /p
-#
-# We copy the original message as a comment into the .msg file.
-#
-/^msgid/ {
-# Does not work now
-#  /"$/! {
-#    s/\\$//
-#    s/$/ ... (more lines following)"/
-#  }
-  s/^msgid[ 	]*"\(.*\)"$/$ Original Message: \1/
-  p
-}
-#
-# The .msg file contains, other then the .po file, only the translations
-# but each given a unique ID.  Starting from 1 and incrementing by 1 for
-# each message we assign them to the messages.
-# It is important that the .po file used to generate the cat-id-tbl.c file
-# (with po-to-tbl) is the same as the one used here.  (At least the order
-# of declarations must not be changed.)
-#
-/^msgstr/ {
-  s/msgstr[ 	]*"\(.*\)"/\1/
-  x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
-  td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
-  :d
-  s/9\(_*\)$/_\1/
-  td
-# Assure at least one digit is available.
-  s/^\(_*\)$/0\1/
-# Increment the last digit.
-  s/8\(_*\)$/9\1/
-  s/7\(_*\)$/8\1/
-  s/6\(_*\)$/7\1/
-  s/5\(_*\)$/6\1/
-  s/4\(_*\)$/5\1/
-  s/3\(_*\)$/4\1/
-  s/2\(_*\)$/3\1/
-  s/1\(_*\)$/2\1/
-  s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
-  s/_/0/g
-  x
-# Bring the line in the format `<number> <message>'
-  G
-  s/^[^\n]*$/& /
-  s/\(.*\)\n\([0-9]*\)/\2 \1/
-# Clear flag from last substitution.
-  tb
-# Append the next line.
-  :b
-  N
-# Look whether second part is a continuation line.
-  s/\(.*\n\)"\(.*\)"/\1\2/
-# Yes, then branch.
-  ta
-  P
-  D
-# Note that `D' includes a jump to the start!!
-# We found a continuation line.  But before printing insert '\'.
-  :a
-  s/\(.*\)\(\n.*\)/\1\\\2/
-  P
-# We cannot use the sed command `D' here
-  s/.*\n\(.*\)/\1/
-  tb
-}
-d