diff options
Diffstat (limited to 'media-gfx/iscan/iscan-2.4.0.ebuild')
| -rw-r--r-- | media-gfx/iscan/iscan-2.4.0.ebuild | 308 |
1 files changed, 308 insertions, 0 deletions
diff --git a/media-gfx/iscan/iscan-2.4.0.ebuild b/media-gfx/iscan/iscan-2.4.0.ebuild new file mode 100644 index 000000000000..0f80a6c44f40 --- /dev/null +++ b/media-gfx/iscan/iscan-2.4.0.ebuild @@ -0,0 +1,308 @@ +# Copyright 1999-2006 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/media-gfx/iscan/iscan-2.4.0.ebuild,v 1.1 2006/12/17 22:45:20 sbriesen Exp $ + +inherit eutils multilib toolchain-funcs linux-info autotools rpm + +# HINTS: +# -> non-free modules are x86 only +# -> isane frontend needs non-free modules +# -> sane-epkowa should be usable on every arch +# -> ${P}-0.tar.gz (for gcc 3.2/3.3) +# -> ${P}-0.c2.tar.gz (for gcc 3.4 or later) + +# PLUGINS: +# -> iscan-plugin-gt-7200 == Perfection 1250 PHOTO +# -> iscan-plugin-gt-7300 == Perfection 1260 PHOTO +# -> iscan-plugin-gt-9400 == Perfection 3170 PHOTO (esfw32.bin) +# -> iscan-plugin-gt-f500 == Perfection 2480/2580 PHOTO (esfw41.bin) +# -> iscan-plugin-gt-f520 == Perfection 3490/3590 PHOTO (esfw52.bin) +# -> iscan-plugin-gt-f600 == Perfection 4180 PHOTO (esfw43.bin) +# -> iscan-plugin-gt-x750 == Perfection 4490 PHOTO (esfw54.bin) +# -> iscan-plugin-gt-s600 == Perfection V10/V100 PHOTO (esfw66.bin) +# -> iscan-plugin-gt-f700 == Perfection V350 PHOTO (esfw68.bin) + +# FIXME: +# Make jpeg/png optional. The problem is, that the +# configure script ignores --disable-*, if the +# corresponding lib is found on the system. +# Furthermore, isane doesn't compile w/o libusb, +# this should be fixed somehow. + +# available x86 plugins (will be assembled below) +PLUGINS=" + v1180/7200-1.0.0-1 + v1180/7300-1.0.0-1 + v1180/9400-1.0.0-1 + v1180/f500-1.0.0-1 + v1180/f520-1.0.0-1 + v1180/f600-1.0.0-1 + v1180/x750-1.0.0-1 + 2.3.0/s600-2.0.0-1 + 2.3.0/f700-2.0.0-0 +" + +# Firmware files within plugin RPMs +FIRMWARE=( "esfw41.bin Perfection 2480/2580 PHOTO" + "esfw32.bin Perfection 3170 PHOTO" + "esfw52.bin Perfection 3490/3590 PHOTO" + "esfw43.bin Perfection 4180 PHOTO" + "esfw54.bin Perfection 4490 PHOTO" + "esfw66.bin Perfection V10/V100 PHOTO" + "esfw68.bin Perfection V350 PHOTO" ) + +SRC_REV="0" # revision used by upstream + +SRC_GCC33="http://lx1.avasys.jp/iscan/${PV}/${P}-${SRC_REV}.tar.gz" +SRC_GCC34="http://lx1.avasys.jp/iscan/${PV}/${P}-${SRC_REV}.c2.tar.gz" +BIN_GCC33="" +BIN_GCC34="" + +for X in ${PLUGINS}; do + BIN_GCC33="${BIN_GCC33} http://lx1.avasys.jp/iscan/${X%%/*}/iscan-plugin-gt-${X##*/}.i386.rpm" + BIN_GCC34="${BIN_GCC34} http://lx1.avasys.jp/iscan/${X%%/*}/iscan-plugin-gt-${X##*/}.c2.i386.rpm" +done + +# feel free to add your arch, every non-x86 +# arch doesn't install any x86-only stuff. +KEYWORDS="~amd64 ~x86" + +DESCRIPTION="EPSON Image Scan! for Linux (including sane-epkowa backend and firmware)" +HOMEPAGE="http://www.avasys.jp/english/linux_e/dl_scan.html" +SRC_URI="x86? ( ${SRC_GCC33} ${BIN_GCC33} ) ${SRC_GCC34} ${BIN_GCC34}" +LICENSE="GPL-2 EAPL EPSON" +SLOT="0" + +IUSE="X gimp unicode" +IUSE_LINGUAS="de es fr it ja ko nl pt zh_CN zh_TW" + +for X in ${IUSE_LINGUAS}; do IUSE="${IUSE} linguas_${X}"; done + +QA_TEXTRELS=" + usr/lib/iscan/libesint41.so.2.0.0 + usr/lib/iscan/libesint52.so.2.0.0" + +DEPEND="media-gfx/sane-backends + media-libs/libpng + media-libs/jpeg + >=sys-fs/udev-103 + >=dev-libs/libusb-0.1.12 + x86? ( + X? ( + sys-devel/gettext + >=x11-libs/gtk+-2.0 + gimp? ( media-gfx/gimp ) + ) + )" + +snapscan_firmware() { + local i + echo "#-------------- EPSON Image Scan! for Linux Scanner-Firmware --------------" + for i in "${FIRMWARE[@]}"; do + echo + echo "# ${i#* } (${i%% *})" + echo "#firmware /usr/share/iscan/${i%% *}" + done + echo + cat 2>/dev/null "${1}" +} + +usermap_to_udev() { + local DEVICE='\1ATTRS{idVendor}=="\L\2\E", ATTRS{idProduct}=="\L\3\E"' + local ACTION='MODE="0660", GROUP="scanner"' + [ ${KERNEL_HAS_USBFS} -ne 0 ] && ACTION="${ACTION}"', RUN+="/lib/udev/iscan-usb.sh"' + echo 'SUBSYSTEM!="usb_device", ACTION!="add", GOTO="iscan_rules_end"' + echo + sed -n -e "s|^\(# SEIKO EPSON.*\)|\1|p" \ + -e "s|^\(#*\)i*scan-device *0x0003 *0x\([^ ]\+\) *0x\([^ ]\+\)*.*|${DEVICE}, ${ACTION}|p" "${1}" + echo + echo 'LABEL="iscan_rules_end"' +} + +pkg_setup() { + local i + if ! use x86 && ( use X || use gimp ); then + ewarn + ewarn "The iscan application needs CSS x86-only libs and" + ewarn "thus can't be built currently. You can still use" + ewarn "'xscanimage', 'xsane' or 'kooka' with sane-epkowa" + ewarn "backend. But some low-end scanners are also not" + ewarn "supported, because they need these x86 libs, too." + ewarn + fi + + # Select correct tarball for installed GCC. This is not a perfect + # solution and should be expanded to other working GCC versions. + einfo "GCC version: $(gcc-fullversion)" + case "$(gcc-version)" in + 3.[23]) + if use x86; then + MY_A="${SRC_GCC33##*/}" + for i in ${BIN_GCC33}; do MY_A="${MY_A} ${i##*/}"; done + else # fallback to GCC 3.4, should not harm. + MY_A="${SRC_GCC34##*/}" + for i in ${BIN_GCC34}; do MY_A="${MY_A} ${i##*/}"; done + fi + ;; + 3.4|4.[01234]) # 4.x seems to work (tested with Perfection 3490 PHOTO) + MY_A="${SRC_GCC34##*/}" + for i in ${BIN_GCC34}; do MY_A="${MY_A} ${i##*/}"; done + ;; + *) + if use x86; then + die "Your GCC version is not supported. You need either 3.2, 3.3, 3.4 or 4.x!" + else + MY_A="${SRC_GCC34##*/}" # fallback to GCC 3.4, should not harm. + for i in ${BIN_GCC34}; do MY_A="${MY_A} ${i##*/}"; done + fi + ;; + esac + + # check for usbfs support (obsolete with kernel >= 2.6.16) + linux-info_pkg_setup + linux_chkconfig_present USB_DEVICEFS + KERNEL_HAS_USBFS=${?} +} + +src_unpack() { + local i + + cd "${WORKDIR}" + for i in ${MY_A}; do + case "${i}" in + *.rpm) + echo ">>> Unpacking ${i}" + rpm_unpack "${DISTDIR}/${i}" || die "failure unpacking ${i}" + ;; + *) + unpack "${i}" + ;; + esac + done + + cd "${S}" + + # convert japanese docs to UTF-8 + if use unicode && use linguas_ja; then + einfo "Converting docs to UTF-8" + for i in {NEWS,README}.ja non-free/*.ja.txt; do + if [ -f "${i}" ]; then + iconv -f eucjp -t utf8 -o "${i}~" "${i}" && mv -f "${i}~" "${i}" || rm -f "${i}~" + fi + done + fi + + # disable iscan frontend + none-free modules + if ! ( use x86 && use X ); then + sed -i -e "s:PKG_CHECK_MODULES(GTK,.*):AC_DEFINE([HAVE_GTK_2], 0):g" \ + -e "s:\(PKG_CHECK_MODULES(GDK_IMLIB,.*)\):#\1:g" configure.ac + sed -i -e 's:^\([[:space:]]*\)frontend[[:space:]]*\\:\1\\:g' \ + -e 's:^\([[:space:]]*\)non-free[[:space:]]*\\:\1\\:g' \ + -e 's:^\([[:space:]]*\)po[[:space:]]*\\:\1\\:g' Makefile* + sed -i -e 's:iscan.1::g' doc/Makefile* + fi +} + +src_compile() { + eautoconf + econf --enable-jpeg --enable-png --with-pic || die "econf failed" + emake || die "emake failed" +} + +src_install() { + local MY_LIB="/usr/$(get_libdir)" + make DESTDIR="${D}" install || die "make install failed" + + # --disable-static doesn't work, so we just remove obsolete static lib + sed -i -e "s:^\(old_library=\):# \1:g" "${D}${MY_LIB}/sane/libsane-epkowa.la" + rm -f "${D}${MY_LIB}/sane/libsane-epkowa.a" + + # install scanner plugins (x86-only) + if use x86; then + dodir ${MY_LIB}/iscan + cp -df "${WORKDIR}"/usr/lib/iscan/* "${D}${MY_LIB}"/iscan/. + fi + + # install scanner firmware (could be used by sane-backends) + insinto /usr/share/iscan + doins "${WORKDIR}"/usr/share/iscan/* + + # install docs + dodoc AUTHORS NEWS README doc/epkowa.desc + use linguas_ja && dodoc NEWS.ja README.ja + + # remove 'make-udev-rules', we use our own stuff below + rm -f "${D}usr/lib/iscan/make-udev-rules" + + # install USB hotplug stuff + dodir /etc/udev/rules.d + usermap_to_udev utils/hotplug/iscan.usermap \ + > "${D}etc/udev/rules.d/75-iscan.rules" + if [ ${KERNEL_HAS_USBFS} -ne 0 ]; then + exeinto /lib/udev + doexe ${FILESDIR}/iscan-usb.sh + fi + + # install sane config + insinto /etc/sane.d + doins backend/epkowa.conf + + # link iscan so it is seen as a plugin in gimp + if use x86 && use X && use gimp; then + local plugindir + if [ -x /usr/bin/gimptool ]; then + plugindir="$(gimptool --gimpplugindir)/plug-ins" + elif [ -x /usr/bin/gimptool-2.0 ]; then + plugindir="$(gimptool-2.0 --gimpplugindir)/plug-ins" + else + die "Can't find GIMP plugin directory." + fi + dodir "${plugindir}" + dosym /usr/bin/iscan "${plugindir}" + fi + + # install desktop entry + if use x86 && use X; then + make_desktop_entry iscan "Image Scan! for Linux ${PV}" scanner.png + fi +} + +pkg_postinst() { + local i + local DLL_CONF="/etc/sane.d/dll.conf" + local EPKOWA_CONF="/etc/sane.d/epkowa.conf" + local SNAPSCAN_CONF="/etc/sane.d/snapscan.conf" + elog + if grep -q "^[ \t]*\<epkowa\>" ${DLL_CONF}; then + elog "Please edit ${EPKOWA_CONF} to suit your needs." + elif grep -q "\<epkowa\>" ${DLL_CONF}; then + elog "Hint: to enable the backend, add 'epkowa' to ${DLL_CONF}" + elog "Then edit ${EPKOWA_CONF} to suit your needs." + else + echo "epkowa" >> ${DLL_CONF} + elog "A new entry 'epkowa' was added to ${DLL_CONF}" + elog "Please edit ${EPKOWA_CONF} to suit your needs." + fi + elog + elog "You can also use the 'snapscan' backend if you have a recent" + elog "sane-backend installation. Firmware files for some newer" + elog "EPSON scanners were installed into /usr/share/iscan:" + elog + for i in "${FIRMWARE[@]}"; do + elog " ${i%% *}: ${i#* }" + done + elog + if ! grep 2>/dev/null -q "/usr/share/iscan/.*\.bin" "${SNAPSCAN_CONF}"; then + snapscan_firmware "${SNAPSCAN_CONF}" > "${SNAPSCAN_CONF}~~~" \ + && mv -f "${SNAPSCAN_CONF}~~~" "${SNAPSCAN_CONF}" \ + || rm -f "${SNAPSCAN_CONF}~~~" + elog "The firmware entries were added to ${SNAPSCAN_CONF}" + else + elog "Please edit ${SNAPSCAN_CONF} to suit your needs." + fi + elog "Hint: not all models are supported by 'snapscan' yet!" + elog + elog "You can check which backend fits best for your scanner:" + elog "http://www.sane-project.org/cgi-bin/driver.pl?manu=Epson&bus=any" + elog +} |