media-gfx/sane-backends: address QA issues, add missing backend to .30

Signed-off-by: Joonas Niilola <juippis@gentoo.org>

2 files changed, 348 insertions, 0 deletions

diff --git a/media-gfx/sane-backends/files/sane-backends-1.0.30-add_hpaio_epkowa_dll.conf.patch b/media-gfx/sane-backends/files/sane-backends-1.0.30-add_hpaio_epkowa_dll.conf.patch
new file mode 100644
index 000000000000..b92e14b67791
--- /dev/null
+++ b/media-gfx/sane-backends/files/sane-backends-1.0.30-add_hpaio_epkowa_dll.conf.patch
@@ -0,0 +1,11 @@
+diff -Naur backends-1.0.30/backend/dll.conf.in backends-1.0.30-r1/backend/dll.conf.in
+--- backends-1.0.30/backend/dll.conf.in	2020-05-17 14:16:28.000000000 +0300
++++ backends-1.0.30-r1/backend/dll.conf.in	2020-06-27 08:24:18.378856341 +0300
+@@ -98,3 +98,7 @@
+ #umax_pp
+ v4l
+ xerox_mfp
++# Add support for the HP-specific backend.  Needs net-print/hplip installed.
++hpaio
++# Add support for the Epson-specific backend.  Needs media-gfx/iscan installed.
++epkowa
diff --git a/media-gfx/sane-backends/sane-backends-1.0.30-r1.ebuild b/media-gfx/sane-backends/sane-backends-1.0.30-r1.ebuild
new file mode 100644
index 000000000000..7b10feb97701
--- /dev/null
+++ b/media-gfx/sane-backends/sane-backends-1.0.30-r1.ebuild
@@ -0,0 +1,337 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit autotools eutils flag-o-matic multilib-minimal systemd toolchain-funcs udev user
+
+# gphoto and v4l are handled by their usual USE flags.
+# The pint backend was disabled because I could not get it to compile.
+IUSE_SANE_BACKENDS="
+	abaton
+	agfafocus
+	apple
+	artec
+	artec_eplus48u
+	as6e
+	avision
+	bh
+	canon
+	canon630u
+	canon_dr
+	canon_pp
+	cardscan
+	coolscan
+	coolscan2
+	coolscan3
+	dc210
+	dc240
+	dc25
+	dell1600n_net
+	dmc
+	epjitsu
+	epson
+	epson2
+	escl
+	fujitsu
+	genesys
+	gt68xx
+	hp
+	hp3500
+	hp3900
+	hp4200
+	hp5400
+	hp5590
+	hpljm1005
+	hpsj5s
+	hs2p
+	ibm
+	kodak
+	kodakaio
+	kvs1025
+	kvs20xx
+	kvs40xx
+	leo
+	lexmark
+	ma1509
+	magicolor
+	matsushita
+	microtek
+	microtek2
+	mustek
+	mustek_pp
+	mustek_usb
+	mustek_usb2
+	nec
+	net
+	niash
+	p5
+	pie
+	pixma
+	plustek
+	plustek_pp
+	pnm
+	qcam
+	ricoh
+	rts8891
+	s9036
+	sceptre
+	sharp
+	sm3600
+	sm3840
+	snapscan
+	sp15c
+	st400
+	stv680
+	tamarack
+	teco1
+	teco2
+	teco3
+	test
+	u12
+	umax
+	umax1220u
+	umax_pp
+	xerox_mfp"
+
+IUSE="gphoto2 ipv6 snmp systemd threads usb v4l xinetd zeroconf"
+
+for GBACKEND in ${IUSE_SANE_BACKENDS}; do
+	case ${GBACKEND} in
+	# Disable backends that require parallel ports as no one has those anymore.
+	canon_pp|hpsj5s|mustek_pp|\
+	pnm|mustek_usb2|kvs40xx)
+		IUSE+=" sane_backends_${GBACKEND}"
+		;;
+	*)
+		IUSE+=" +sane_backends_${GBACKEND}"
+	esac
+done
+
+REQUIRED_USE="
+	sane_backends_escl? ( zeroconf )
+	sane_backends_kvs40xx? ( threads )
+	sane_backends_mustek_usb2? ( threads )
+"
+
+MY_PN=${PN//sane-/}
+MY_P="${MY_PN}-${PV}"
+
+DESCRIPTION="Scanner Access Now Easy - Backends"
+HOMEPAGE="http://www.sane-project.org/"
+SRC_URI="https://gitlab.com/sane-project/backends/-/archive/${PV}/${MY_P}.tar.gz"
+
+LICENSE="GPL-2 public-domain"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sparc ~x86 ~amd64-linux ~x86-linux"
+
+RDEPEND="
+	gphoto2? (
+		>=media-libs/libgphoto2-2.5.3.1:=[${MULTILIB_USEDEP}]
+		>=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}]
+	)
+	sane_backends_canon_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
+	sane_backends_dc210? ( >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] )
+	sane_backends_dc240? ( >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] )
+	sane_backends_dell1600n_net? (
+		>=media-libs/tiff-3.9.7-r1:0=[${MULTILIB_USEDEP}]
+		>=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}]
+	)
+	sane_backends_escl? ( net-misc/curl )
+	sane_backends_hpsj5s? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
+	sane_backends_mustek_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
+	snmp? ( net-analyzer/net-snmp:0= )
+	systemd? ( sys-apps/systemd:0= )
+	usb? ( >=virtual/libusb-1-r1:1=[${MULTILIB_USEDEP}] )
+	v4l? ( >=media-libs/libv4l-0.9.5[${MULTILIB_USEDEP}] )
+	xinetd? ( sys-apps/xinetd )
+	zeroconf? ( >=net-dns/avahi-0.6.31-r2[${MULTILIB_USEDEP}] )
+"
+
+DEPEND="${RDEPEND}
+	dev-libs/libxml2
+	v4l? ( sys-kernel/linux-headers )
+"
+BDEPEND="
+	sys-devel/gettext
+	virtual/pkgconfig
+"
+
+PATCHES=(
+	"${FILESDIR}"/${PN}-1.0.24-saned_pidfile_location.patch
+	"${FILESDIR}"/${PN}-1.0.27-disable-usb-tests.patch
+	"${FILESDIR}"/${P}-missing-stdint-include.patch
+	"${FILESDIR}"/sane-backends-1.0.30-add_hpaio_epkowa_dll.conf.patch
+)
+
+S="${WORKDIR}/${MY_P}"
+
+MULTILIB_CHOST_TOOLS=(
+	/usr/bin/sane-config
+)
+
+pkg_setup() {
+	enewgroup scanner
+	enewuser saned -1 -1 -1 scanner
+}
+
+src_prepare() {
+	default
+
+	# Patch out the git reference so we can run eautoreconf
+	sed -i -e "s/m4_esyscmd_s(\[git describe --dirty\])/${PV}/" configure.ac || die
+	eautoreconf
+
+	# Fix for "make check".  Upstream sometimes forgets to update this.
+	local ver=$(./configure --version | awk '{print $NF; exit 0}')
+	sed -i \
+		-e "/by sane-desc 3.5 from sane-backends/s:sane-backends .*:sane-backends ${ver}:" \
+		testsuite/tools/data/html* || die
+
+}
+
+src_configure() {
+	append-flags -fno-strict-aliasing # From Fedora
+	multilib-minimal_src_configure
+}
+
+multilib_src_configure() {
+	# the blank is intended - an empty string would result in building ALL backends.
+	local lbackends=" "
+
+	use gphoto2 && lbackends="gphoto2"
+	use v4l && lbackends="${BACKENDS} v4l"
+	for backend in ${IUSE_SANE_BACKENDS}; do
+		if use "sane_backends_${backend}" && [ ${backend} != pnm ]; then
+			lbackends="${lbackends} ${backend}"
+		fi
+	done
+
+	local myconf=(
+		$(use_with usb)
+		$(multilib_native_use_with snmp)
+	)
+
+	# you can only enable this backend, not disable it...
+	if use sane_backends_pnm; then
+		myconf+=( --enable-pnm-backend )
+	fi
+	if use sane_backends_mustek_pp; then
+		myconf+=( --enable-parport-directio )
+	fi
+	if ! { use sane_backends_canon_pp || use sane_backends_hpsj5s || use sane_backends_mustek_pp; }; then
+		myconf+=( sane_cv_use_libieee1284=no )
+	fi
+
+	# relative path must be used for tests to work properly
+	# All distributions pass --disable-locking because /var/lock/sane/ would be a world-writable directory
+	# --without-api-spec to not automagically depend on tons of stuff
+	# that break in many ways, bug #636202, #668232, #668350
+	# People can refer to the "Programmer's Documentation" at http://www.sane-project.org/docs.html
+	ECONF_SOURCE=${S} \
+	SANEI_JPEG="sanei_jpeg.o" SANEI_JPEG_LO="sanei_jpeg.lo" \
+	BACKENDS="${lbackends}" \
+	econf \
+		--disable-locking \
+		--without-api-spec \
+		$(use_with gphoto2) \
+		$(multilib_native_use_with systemd) \
+		$(use_with v4l) \
+		$(use_enable ipv6) \
+		$(use_enable threads pthread) \
+		$(use_enable zeroconf avahi) \
+		"${myconf[@]}"
+}
+
+multilib_src_compile() {
+	emake VARTEXFONTS="${T}/fonts"
+
+	if tc-is-cross-compiler; then
+		pushd "${BUILD_DIR}"/tools >/dev/null || die
+
+		# The build system sucks and doesn't handle this properly.
+		# https://alioth.debian.org/tracker/index.php?func=detail&aid=314236&group_id=30186&atid=410366
+		tc-export_build_env BUILD_CC
+		${BUILD_CC} ${BUILD_CPPFLAGS} ${BUILD_CFLAGS} ${BUILD_LDFLAGS} \
+			-I. -I../include -I"${S}"/include \
+			"${S}"/sanei/sanei_config.c "${S}"/sanei/sanei_constrain_value.c \
+			"${S}"/sanei/sanei_init_debug.c "${S}"/tools/sane-desc.c -o sane-desc || die
+		local dirs=( hal hotplug hotplug-ng udev )
+		local targets=(
+			hal/libsane.fdi
+			hotplug/libsane.usermap
+			hotplug-ng/libsane.db
+			udev/libsane.rules
+		)
+		mkdir -p "${dirs[@]}" || die
+		emake "${targets[@]}"
+
+		popd >/dev/null || die
+	fi
+
+	if use usb; then
+		sed -i -e '/^$/d' \
+			tools/hotplug/libsane.usermap || die
+	fi
+}
+
+multilib_src_install() {
+	emake INSTALL_LOCKPATH="" DESTDIR="${D}" install \
+		docdir="${EPREFIX}"/usr/share/doc/${PF}
+
+	if multilib_is_native_abi; then
+		if use usb; then
+			insinto /etc/hotplug/usb
+			doins tools/hotplug/libsane.usermap
+		fi
+
+		udev_newrules tools/udev/libsane.rules 41-libsane.rules
+		insinto "/usr/share/pkgconfig"
+		doins tools/sane-backends.pc
+	fi
+}
+
+multilib_src_install_all() {
+	keepdir /var/lib/lock/sane
+	fowners root:scanner /var/lib/lock/sane
+	fperms g+w /var/lib/lock/sane
+	dodir /etc/env.d
+
+	if use systemd; then
+		systemd_newunit "${FILESDIR}"/saned_at.service "saned@.service"
+		systemd_newunit "${FILESDIR}"/saned.socket saned.socket
+	fi
+
+	if use usb; then
+		exeinto /etc/hotplug/usb
+		doexe tools/hotplug/libusbscanner
+		newdoc tools/hotplug/README README.hotplug
+	fi
+
+	dodoc NEWS AUTHORS PROBLEMS README README.linux
+	find "${D}" -name '*.la' -delete || die
+
+	if use xinetd; then
+		insinto /etc/xinetd.d
+		doins "${FILESDIR}"/saned
+	fi
+
+	newinitd "${FILESDIR}"/saned.initd saned
+	newconfd "${FILESDIR}"/saned.confd saned
+}
+
+pkg_postinst() {
+	elog "Optional backends:"
+	optfeature "Epson-specific backend" media-gfx/iscan
+	optfeature "HP-specific backend" net-print/hplip
+
+	if use xinetd; then
+		elog "If you want remote clients to connect, edit"
+		elog "/etc/sane.d/saned.conf and /etc/hosts.allow"
+	fi
+
+	if ! use systemd; then
+		elog "If you are using a USB scanner, add all users who want"
+		elog "to access your scanner to the \"scanner\" group."
+	fi
+}