# Copyright 1999-2006 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Header: /var/cvsroot/gentoo-x86/net-dialup/fcdsl/fcdsl-2.6.37.ebuild,v 1.2 2006/03/12 11:31:03 mrness Exp $ inherit linux-mod eutils rpm DESCRIPTION="AVM FRITZ!Card DSL drivers for 2.6 kernel" HOMEPAGE="http://www.avm.de/" SRC_HEAD="ftp://ftp.suse.com/pub/suse/i386/10.1/SUSE-Linux10.1-Beta3-Extra/suse" SRC_URI="x86? ( ${SRC_HEAD}/i586/km_${P/2.6./2.6-}.i586.rpm ${SRC_HEAD}/i586/avm_${P/2.6./2.6-}.i586.rpm ) amd64? ( ${SRC_HEAD}/x86_64/km_${P/2.6./2.6-}.x86_64.rpm ${SRC_HEAD}/x86_64/avm_${P/2.6./2.6-}.x86_64.rpm )" LICENSE="LGPL-2" KEYWORDS="~x86 ~amd64 -*" IUSE="unicode" SLOT="0" RDEPEND=">=net-dialup/capi4k-utils-20040810" S="${WORKDIR}" pkg_setup() { use x86 && FCDSL_MODULES=("fcdsl2" "fcdslsl" "fcdslusb" "fcdslslusb" "fcdslusb2" "fcdsl" "fcdslusba") use amd64 && FCDSL_MODULES=("fcdsl2" "fcdslsl" "fcdslusb" "fcdslslusb" "fcdslusb2") FCDSL_NAMES=("AVM FRITZ!Card DSL v2.0" "AVM FRITZ!Card DSL SL" "AVM FRITZ!Card DSL USB" "AVM FRITZ!Card DSL SL USB" "AVM Fritz!Card DSL USB v2.0" "AVM FRITZ!Card DSL" "AVM Fritz!Card DSL USB analog") FCDSL_BUSTYPES=("pci" "pci" "usb" "usb" "usb" "pci" "usb") FCDSL_IDS=("1244:2900" "1244:2700" "057c:2300" "057c:3500" "057c:3600" "1131:5402" "057c:3000") FCDSL_FIRMWARES=("fds2base.bin" "fdssbase.bin" "fdsubase.frm" "fdlubase.frm" "fds2base.frm" "fdslbase.bin" "fdlabase.frm") CONFIG_CHECK="ISDN_CAPI_CAPI20" linux-mod_pkg_setup MODULE_NAMES="" #Check existence of user selected cards if [ -n "${FCDSL_CARDS}" ] ; then for USERCARD in ${FCDSL_CARDS} ; do for ((CARD=0; CARD < ${#FCDSL_MODULES[*]}; CARD++)); do if [ "${USERCARD}" = "${FCDSL_MODULES[CARD]}" ]; then MODULE_NAMES="${MODULE_NAMES} ${FCDSL_MODULES[CARD]}(net:${WORKDIR}/usr/src/kernel-modules/fcdsl/src/src.${FCDSL_MODULES[CARD]})" continue 2 fi done die "Driver for ${USERCARD} not present in ${P}" done else einfo einfo "You can control the modules which are built with the variable" einfo "FCDSL_CARDS which should contain a blank separated list" einfo "of a selection from the following cards:" einfo " ${FCDSL_MODULES[*]}" for ((CARD=0; CARD < ${#FCDSL_MODULES[*]}; CARD++)); do MODULE_NAMES="${MODULE_NAMES} ${FCDSL_MODULES[CARD]}(net:${WORKDIR}/usr/src/kernel-modules/fcdsl/src/src.${FCDSL_MODULES[CARD]})" done fi BUILD_TARGETS="all" BUILD_PARAMS="KDIR='${KV_DIR}' LIBDIR='${S}'" } src_unpack() { local rpm_archive for rpm_archive in ${A} ; do rpm_unpack "${DISTDIR}/${rpm_archive}" || die "failed to unpack ${rpm_archive} file" done cd "${S}" mv usr/src/kernel-modules/fcdsl/src/src.fcdslusb1 \ usr/src/kernel-modules/fcdsl/src/src.fcdslusb if use x86; then for ((CARD=0; CARD < ${#FCDSL_MODULES[*]}; CARD++)); do cd usr/src/kernel-modules/fcdsl/src/src.${FCDSL_MODULES[CARD]} [ -f "${FILESDIR}/${FCDSL_MODULES[CARD]}.diff" ] && epatch "${FILESDIR}/${FCDSL_MODULES[CARD]}.diff" cd "${S}" done fi # convert docs from latin1 to UTF-8 if use unicode; then for i in usr/share/doc/packages/avm_fcdsl/compile-help-german.txt etc/drdsl/drdsl.ini; do einfo "Converting '${i##*/}' to UTF-8" iconv -f latin1 -t utf8 -o "${i}~" "${i}" && mv -f "${i}~" "${i}" || rm -f "${i}~" done fi } src_install() { linux-mod_src_install for ((CARD=0; CARD < ${#FCDSL_MODULES[*]}; CARD++)); do if [ -n "${FCDSL_CARDS}" ] ; then INS="" for USERCARD in ${FCDSL_CARDS} ; do if [ "${USERCARD}" = "${FCDSL_MODULES[CARD]}" ]; then INS="1"; fi done if [ -z "${INS}" ]; then continue; fi fi insinto /lib/firmware/isdn doins "${WORKDIR}/lib/firmware/isdn/${FCDSL_FIRMWARES[CARD]}" done insinto /etc/drdsl doins etc/drdsl/drdsl.ini dosbin sbin/drdsl cd usr/share/doc/packages/avm_fcdsl dodoc *.txt dohtml *.html *.jpg docinto example dodoc example/* } pkg_postinst() { linux-mod_pkg_postinst einfo "The preferred way to setup your card is either /etc/capi.conf" einfo "or hotplug, since USB-Cards are detected automatically." einfo einfo "If you want to setup your DSL card driver and create a peer file, please run:" einfo " etc-update" einfo " emerge --config '=${CATEGORY}/${PF}'" einfo " /etc/init.d/capi start" einfo " drdsl" #ewarn #ewarn "'drdsl' has now its own ebuild. Please emerge net-dialup/drdsl." epause 10 } #pkg-config functions detect_fcdsl_card() { PCI_IDS="" USB_IDS="" if [ -d /sys/bus ]; then if [ -d /sys/bus/pci/devices ]; then cd /sys/bus/pci/devices for PCI_DEVICE in *; do vendor="$(< ${PCI_DEVICE}/vendor)" device="$(< ${PCI_DEVICE}/device)" PCI_IDS="${PCI_IDS}${vendor:2}:${device:2} " done fi if [ -d /sys/bus/usb/devices ]; then cd /sys/bus/usb/devices for USB_DEVICE in [0-9]*; do if [ -f ${USB_DEVICE}/idVendor ]; then USB_IDS="${USB_IDS}$(< ${USB_DEVICE}/idVendor):$(< ${USB_DEVICE}/idProduct) " fi done fi fi FCDSL_MODULE="" for ((CARD=0; CARD < ${#FCDSL_IDS[*]}; CARD++)); do BUS_IDS="" if [ "${FCDSL_BUSTYPES[CARD]}" == "pci" ]; then BUS_IDS="${PCI_IDS}" else BUS_IDS="${USB_IDS}" fi for BUS_ID in ${BUS_IDS}; do if [ "${BUS_ID}" == "${FCDSL_IDS[CARD]}" ]; then einfo "Found: ${FCDSL_NAMES[CARD]}" FCDSL_FIRMWARE="${FCDSL_FIRMWARES[CARD]}" FCDSL_MODULE="${FCDSL_MODULES[CARD]}" fi done done if [ "${FCDSL_MODULE}" == "" ]; then ewarn "No AVM FRITZ!Card DSL found!" fi } readpassword() { VALUE_1="" VALUE_2="" while true; do einfo "Enter your password:" read -r -s VALUE_1 einfo "Retype your password:" read -r -s VALUE_2 if [ "${VALUE_1}" == "" ]; then echo eerror "You entered a blank password. Please try again." echo else if [ "${VALUE_1}" == "${VALUE_2}" ] ; then break else echo eerror "Your password entries do not match. Please try again." echo fi fi done eval ${1}=${VALUE_1} VALUE_1="" VALUE_2="" unset VALUE_1 unset VALUE_2 } readvalue() { VALUE="" while true; do einfo "${2}:" read VALUE if [ "${VALUE}" == "" ]; then eerror "You entered a blank value. Please try again." echo else break fi done eval ${1}=${VALUE} VALUE="" unset VALUE } pkg_config() { detect_fcdsl_card if [ "${FCDSL_MODULE}" != "" ]; then readvalue FCDSL_PROVIDER "Enter the name of your ISP" if [ ! -e "/etc/ppp/peers/${FCDSL_PROVIDER}" ]; then readvalue FCDSL_USER "Enter your user name" if ! grep "${FCDSL_USER}" /etc/ppp/pap-secrets >/dev/null 2>&1; then readpassword FCDSL_PASSWORD echo '"'${FCDSL_USER}'" * "'${FCDSL_PASSWORD}'"' >>/etc/ppp/pap-secrets unset FCDSL_PASSWORD cat <"/etc/ppp/peers/${FCDSL_PROVIDER}" connect "" ipcp-accept-remote ipcp-accept-local usepeerdns defaultroute user "${FCDSL_USER}" hide-password sync noauth lcp-echo-interval 5 lcp-echo-failure 3 lcp-max-configure 50 lcp-max-terminate 2 noccp noipx noproxyarp mru 1492 mtu 1492 linkname "${FCDSL_PROVIDER}" ipparam internet plugin capiplugin.so avmadsl : /dev/null EOF echo echo echo einfo "Now, you can start an ADSL connection with either" einfo " pon \"${FCDSL_PROVIDER}\"" einfo "or" einfo " pppd call \"${FCDSL_PROVIDER}\"" else ewarn "User \"${FCDSL_USER}\" already exists in \"/etc/ppp/pap-secrets\"!" fi else ewarn "Peer file \"/etc/ppp/peers/${FCDSL_PROVIDER}\" already exists!" fi #Uncomment correspondent lines in /etc/capi.conf & /etc/modules.d/fcdsl if [ -f /etc/capi.conf ]; then sed -i -e "s:^#${FCDSL_MODULE}:${FCDSL_MODULE}:" \ /etc/capi.conf >/dev/null 2>&1 fi if [ -f /etc/modules.d/fcdsl ]; then sed -i -e "s:^#options ${FCDSL_MODULE}:options ${FCDSL_MODULE}:" \ /etc/modules.d/fcdsl >/dev/null 2>&1 fi else ewarn "No AVM FRITZ!Card DSL found!" fi unset FCDSL_PROVIDER unset FCDSL_USER }